Operator Call Error and Solution on Canon iP4600, iP4630, iP4640, iP4650, iP4660, iP4670, iP4680

Information below for Canon iP4600 series: Canon iP4600, iP4630, iP4640, iP4650, iP4660, iP4670, iP4680. For a complete discussion (7 chapters) regarding repairs to the Canon iP4600 series, please read Troubleshooting Canon iP4600 series.

Operator Call Error is when the printer is used to print, the Alarm LED flashes orange a certain amount (x times) and when checking the Status Monitor, an error message appears with an error code. Make repairs according to the instructions that appear on the screen and then press the Resume/Cancel button to continue or cancel printing. If the error still occurs, turn the printer off and then on again, maybe this method can solve the problem.

There are two kinds of error codes that occur on the Canon iP4600 series, namely Operator Call Error and Service Call Error. In this post, we will discuss Operator Call Error, while the discussion for Service Call Error can be read in the post Service Call Error and Solution on Canon iP4600 series. The following is the Operator Call Error that occurs on the Canon iP4600 series and the solutions you can take.

Operator Call Error and Solution on Canon iP4600 series

Error code: 1000

Alarm LED blinking in orange: 2 times

Error: No paper in the rear tray

Solutions:

When the printer is used for printing, there is no paper on the rear tray. The alarm LED will flash orange 2 times and a Printer Status appears on the computer screen that says: No paper in the rear tray, support code 1000. The solution is to load paper in the rear tray and press the Resume/Cancel button to continue printing.

Error code: 1001

Alarm LED blinking in orange: 2 times

Error: No CD/DVD tray

Solutions:

When the printer is used to print CD/DVD labels and the CD/DVD tray is not installed, the Alarm LED will flash orange 2 times and a Printer Status appears on the computer screen that says: No CD/DVD tray, support code 1001. The solution is to insert the CD/DVD tray. DVD then press the Resume/Cancel button to continue printing.

Error code: 1002

Alarm LED blinking in orange: 2 times

Error: No CD/DVD

Solutions:

When the printer is used to print CD/DVD labels and on the CD/DVD tray there is no CD/DVD, the Alarm LED will flash orange 2 times and a Printer Status appears on the computer screen that says: No CD/DVD, support code 1002. The solution is to enter CD/DVD in the CD/DVD tray then press the Resume/Cancel button to continue printing.

Error code: 1003

Alarm LED blinking in orange: 2 times

Error: No paper in the cassette.

Solutions:

When the printer is used to print plain paper from Cassette, and there is no paper on the Cassette unit, the Alarm LED will flash orange 2 times and a Printer Status appears on the computer screen that says: No paper in the cassette, support code 1003. The solution is to confirm that the cassette is selected as the paper source and then load the paper into the cassette, and press the Resume/Cancel button to continue printing.

Error code: 1300

Alarm LED blinking in orange: 3 times

Error: Paper jam.

Solutions:

When the printer is being used for printing, the paper suddenly jams in the rear guide and the bottom guide. Remove the paper from the rear guide or the bottom guide (whichever is easiest for you), pulling the paper out carefully and slowly. After the paper jam is successfully ejected, press the Resume/Cancel button to continue printing.

Error code: 1303

Alarm LED blinking in orange: 3 times

Error: Paper jam in the rear guide.

Solutions:

When the printer is used to print, the paper suddenly jams in the rear guide. Remove the paper from the rear guide, pulling out the paper carefully and slowly. After the paper jam is successfully ejected, press the Resume/Cancel button to continue printing.

Error code: 1304

Alarm LED blinking in orange: 3 times

Error: Paper jam in the under guide.

Solutions:

When the printer is used to print, the paper suddenly jams in the bottom guide. Remove the paper from the bottom guide, pulling out the paper carefully and slowly. After the paper jam is successfully ejected, press the Resume/Cancel button to continue printing.

Error code: 1250

Alarm LED blinking in orange: 3 times

Error: The front door is closed.

Solutions:

When the printer is used for printing, the front door is in the closed position. Open the front door then press the Resume/Cancel button to continue

Error code: 1600

Alarm LED blinking in orange: 4 times

Error: Ink may have run out.

Solutions:

When the ink is detected to run out, you can disable the ink level detection by pressing and holding the Resume/Cancel button for about 5 seconds and then releasing it. You can continue printing with the remaining ink in the ink tank. Immediately replace the ink tank before the ink in the ink tank is completely depleted.

Error code: 1660

Alarm LED blinking in orange: 4 times

Error: Ink tank not installed.

Solutions:

Install the appropriate ink tank correctly, and make sure that all of the ink tank LEDs are red.

Error code: 1401

Alarm LED blinking in orange: 5 times

Error: Print head not installed, or not properly installed.

Solutions:

Put on gloves and follow the following procedure. Remove the Print Head Unit, use a pencil eraser to clean the gold connector on the Electrical Contacts, then clean the Print Head with tissue paper. When finished, reinstall the Print Head Unit correctly.

Error code: 1401

Alarm LED blinking in orange: 5 times

Error: Faulty print head ID.

Solutions:

Put on gloves and follow the following procedure. Remove the Print Head Unit, use a pencil eraser to clean the gold connector on the Electrical Contacts, then clean the Print Head with tissue paper. When finished, reinstall the Print Head Unit correctly. If the error is not resolved, the print head may be damaged. Replace the print head with a new one. Print heads for Canon iP4600 series can be purchased at online stores with Part Number QY6-0072-000.

Error code: 1403

Alarm LED blinking in orange: 5 times

Error: Print head temperature sensor error.

Solutions:

Put on gloves and follow the following procedure. Remove the Print Head Unit, use a pencil eraser to clean the gold connector on the Electrical Contacts, then clean the Print Head with tissue paper. When finished, reinstall the Print Head Unit correctly. If the error is not resolved, the print head may be damaged. Replace the print head with a new one. Print heads for Canon iP4600 series can be purchased at online stores with Part Number QY6-0072-000.

Error code: 1405

Alarm LED blinking in orange: 5 times

Error: Faulty EEPROM data of the print head.

Solutions:

Put on gloves and follow the following procedure. Remove the Print Head Unit, use a pencil eraser to clean the gold connector on the Electrical Contacts, then clean the Print Head with tissue paper. When finished, reinstall the Print Head Unit correctly. If the error is not resolved, the print head may be damaged. Replace the print head with a new one. Print heads for Canon iP4600 series can be purchased at online stores with Part Number QY6-0072-000.

Error codes:

1841, 1846 (only for models not supporting CD/DVD printing)

1851, 1856 (only for models supporting CD/DVD printing)

Alarm LED blinking in orange: 6 times

Error: Inner cover error.

Solutions:

When the printer is used to print, the inner cover is still open. Close the inner cover and press the Resume/Cancel button to continue printing.

Error code: 1850, 1855 (only for models supporting CD/DVD printing)

Alarm LED blinking in orange: 6 times

Error: Inner cover error.

Solutions:

When the printer is used to print CD/DVD labels, the CD/DVD tray is not installed. Open the inner cover, insert the CD/DVD tray, close the inner cover, then press the Resume/Cancel button to continue printing.

Error code: 1830 (only for models supporting CD/DVD printing)

Alarm LED blinking in orange: 6 times

Error: Time-out in CD/DVD print operation.

Solutions:

The specified time period (12 minutes) has elapsed without any printing since the last printing was performed. Press the Resume/Cancel button to clear the error.

Error code: 1681

Alarm LED blinking in orange: 7 times

Error: Multiple ink tanks of the same color installed.

Solutions:

Check the installed ink tank, and replace the wrong ink tank(s) with the correct one(s).

Error code: 1680

Alarm LED blinking in orange: 7 times

Error: Ink tank in a wrong position.

Solutions:

Check the installed ink tank, and check that the ink tank(s) are installed in the correct position.

Error code: 1700, 1701

Alarm LED blinking in orange: 8 times

Error:

1700 (Warning: The ink absorber becomes almost full - overseas)

1701 (Warning: The ink absorber becomes almost full - Japan)

Solutions:

This error occurs because the waste ink absorber is almost full. Press the Resume/Cancel button to exit the error and continue printing without replacing the waste ink absorber. However, when the waste ink absorber is full (D=100.0), the printer cannot be used. In order for the printer to be reused, the ink absorber must be replaced and the waste ink counter reset to zero (D=0000.0). For a full discussion of this error code, please read Reset Canon iP4600 series error 5B00, 1700 Ink Absorber Full.

Error code: 2001

Alarm LED blinking in orange: 9 times

Error: The connected digital camera or digital video camera does not support Camera Direct Printing.

Solutions:

Since the camera connected to the printer does not support printing directly from the camera, disconnect the cable connecting the camera and printer.

Error code: 1310

Alarm LED blinking in orange: 10 times

Error: Automatic duplex printing cannot be performed.

Solutions:

Since the paper length being used is not supported for duplex printing, press the Resume/Cancel button to eject the paper that was being used at the time the error occurred. Pages that would be printed on the back side of the paper at the time of the error will be skipped or not printed.

Error code: 2500

Alarm LED blinking in orange: 11 times

Error: Failed in automatic print head alignment.

Solutions:

Press the Resume/Cancel button to clear the error, then run the automatic print head again. Recommended for Canon iP4600 series, use MP-101 Matte Photo Paper.

Error code: 1683

Alarm LED blinking in orange: 13 times

Error: The remaining ink amount unknown.

Solutions:

Printing with an empty ink tank can damage the printer, when one of the ink tanks runs out, replace the ink tank with a new one. To continue printing without changing the ink tank, press the Resume/Cancel button for 5 seconds or longer to turn off the detecting amount of ink remaining function. After operation, ink level detection for one of the ink tanks has been disabled. Ink level detection will automatically reactivate when an empty ink tank is replaced with a new one.

Error code: 1684

Alarm LED blinking in orange: 14 times

Error: Ink tank not recognized.

Solutions:

Installed ink tanks are not supported (ink tanks sold in different regions from where the printer was purchased). The ink tank LED is off. Install a supported ink tank.

Error codes: 1410, 1411, 1412, 1413, 1414, 1415, 1416, 1417, 1418, 1419

Alarm LED blinking in orange: 15 times

Error: Ink tank not recognized.

Solutions:

A hardware error has occurred in the ink tank, the ink tank LED is off. Remove the ink tank, clean the ink tank chip, and then reinstall the ink tank properly. If this solution does not work, replace the ink tank.

Error code: 1688

Alarm LED blinking in orange: 16 times

Error: No ink (no raw ink).

Solutions:

To continue printing without changing the ink tank, press the Resume/Cancel button for 5 seconds or longer to disable the remaining ink detection function. After that printing can be continued until the remaining ink in the ink tank runs out. Printing with an empty ink tank can damage the printer. Immediately replace the ink tank with a new one and automatically the remaining ink detection function will be active again.

Error code: 2002

Alarm LED blinking in orange: 19 times

Error: Non-supported hub

Solutions:

Remove the applicable USB hub from the PictBridge (USB) connector.

Note

- If you encounter problems with bad printer printouts, please read the following post Troubleshooting Canon printer poor printouts.

- If you need a Service Tool to reset a Canon printer, please read the following posts Canon Service Tool Version and Canon Service Tools and Supported Printers.

A complete discussion regarding Canon iP4600 series repairs, please read Troubleshooting Canon iP4600 series (7 chapters). If you have trouble doing it yourself, we recommend asking for the help of the nearest Canon Service Center or printer repair professional.