T6714 / PXMB6 maintenance box. How to replace, clean, and reset the maintenance box chip

The T6714 / PXMB6 maintenance box stores waste ink generated from the system during print head cleaning. The printer and its software will let you know when the maintenance box needs to be replaced. When the maintenance box needs to be replaced, when the printer is turned on, the LCD screen of the printer will display the error message "Maintenance Error. The Maintenance Box is at the end of its service life. You need to replace it. T6714 / PXMB6 is the spare part number of the Maintenance Box that must be replaced and you can buy it in the market with the keyword T6714 / PXMB6 maintenance box.

Product Description
Product Name : Maintenance Ink Tank / Waste Ink Tank

Item Name : Replacement Ink Maintenance Tank / Maintenance Box

OEM Part Number : T6714 / PXMB6 (T6714: Overseas, PXMB6: Japan)

Feature : original maintenance tank

Condition : Plug and Play.

T6714 / PXMB6 Maintenance Box can be used on printer

T6714 / T671400 / C13T671400 Maintenance Box (Overseas)

Compatible Printers

Epson WorkForce Pro WF series

•  Epson WorkForce Pro WF-8690A
•  Epson WorkForce Pro WF-C8190

•  Epson WorkForce Pro WF-C8190 D3TWC
•  Epson WorkForce Pro WF-C8190 DTW

•  Epson WorkForce Pro WF-C8190 DTWC
•  Epson WorkForce Pro WF-C8190 DW

•  Epson WorkForce Pro WF-C8190a
•  Epson WorkForce Pro WF-C8610

•  Epson WorkForce Pro WF-C8610 DWF
•  Epson WorkForce Pro WF-C8690

•  Epson WorkForce Pro WF-C8690 D3TWFC
•  Epson WorkForce Pro WF-C8690 DTWF

•  Epson WorkForce Pro WF-C8690 DTWFC
•  Epson WorkForce Pro WF-C8690 DWF

•  Epson WorkForce Pro WF-C8690a
•  Epson WorkForce Pro WF-C8690R DTWF

•  Epson WorkForce Pro WF-C869R
•  Epson WorkForce Pro WF-C869R D3TWFC

•  Epson WorkForce Pro WF-C869R DTWF
•  Epson WorkForce Pro WF-C869R DTWFC

•  Epson WorkForce Pro WF-C869Ra
•  Epson WorkForce Pro WF-C878R

•  Epson WorkForce Pro WF-C879R

PXMB6 Maintenance Box (Japan)

Epson PX series

•  Epson PX-M2070FX
•  Epson PX-M7070FX

•  Epson PX-M7110F
•  Epson PX-M7110FP

•  Epson PX-M7110FT
•  Epson PX-S7070X

•  Epson PX-S7110

•  Epson PX-S7110P

How to replace the Maintenance Box T6714 / PXMB6

1.   Make sure you have purchased a new maintenance box PN. T6714 / PXMB6. Turn off the printer, then follow the procedure below.

2.   Open D1 at the back.

3.   Pull out maintenance box on the left.

4.   Replace the new maintenance box.

5.   Close the door D1.

Questions and Answers

Q: Where can I buy the T6714 / PXMB6 OEM Maintenance Box?

A: New OEM maintenance boxes can be purchased at online stores, and you can search for them with the keyword T6714 / PXMB6 Maintenance Box.

Q: If the T6714 / PXMB6 OEM Maintenance Box is not available in the market, is there an alternative?

A: If OEM maintenance box is not available in the market, you can use a compatible T6714 / PXMB6 maintenance box. The following is information about the compatible T6714 / PXMB6 maintenance box.

T6714 / PXMB6 (OEM) = E-6714 / PXMB6 (NO-OEM)

Q: Can the old maintenance box be reused?

A: We don't recommend you to use the old Maintenance Box, but if you are in a forced condition because the new maintenance box is no longer available in the market, there are two alternative solutions that can be done, namely:

1.   Clean the ink pad in the maintenance box then replace the maintenance box chip with a new one.

1.  Remove the label

2.  Clean the ink pad inside.

3.  Dry the ink pad.

4.  Replace the ink pad and close it tightly and do not let it leak.

5.  Replace the maintenance box chip with a new one.

Notes:
-  Turn off the printer before performing the above procedure.
-  Make sure you have purchased a new maintenance box chip before performing the above procedure.

2.   Clean the ink pad in the maintenance box then reset the chip with the T6714 / PXMB6 maintenance box chip resetter.

Notes:

-  First clean the ink pad in the maintenance box.

-  Make sure you have T6713 / LXMB01 maintenance box chip resetter. T6713 / LXMB01 maintenance box chip resetter can be purchased in online stores.

-  Align the maintenance box chip to the resetter.

-  Align the seven pins on the resetter with the seven contacts on the chip maintenance box.

-  Press the resetter, the LED light will flash red at first.

-  Press and hold 3-5 seconds, the LED light will change from red to green. Reset completed.

-  Reinstall the Maintenance Box and turn on the printer.

If you have trouble doing it yourself, we recommend contacting the Epson Service Center or contacting a printer repair professional.