Tuesday, September 10, 2019

Textual description of firstImageUrl

Service Tool v.3000

Start the Service Tool on the connected computer.
1.   When a button is clicked in the Service Tool dialog box, that function is performed. During the operation of the selected function, all the Service Tool buttons are dimmed and inactive.
2.   When the operation is completed, "A function was finished." is displayed, and another function can be selected.
3.   If a non-supported function is selected, "Error!" is displayed. Click OK in the error message dialog box to exit the error.

Canon Service Tool v.3000

Supported Printer

Pixma iP Series
iP4900 series: iP4900, iP4910, iP4920, iP4930, iP4940, iP4950, iP4970, iP4980

Pixma MG Series
MG2100 series: MG2100, MG2110, MG2120, MG2130, MG2140, MG2150, MG2160, MG2170, MG2180
MG3100 series: MG3100, MG3110, MG3120, MG3130, MG3140, MG3150, MG3160, MG3170, MG3180
MG5400 series: MG5400, MG5410, MG5420, MG5440, MG5450, MG5470.


How to Use Canon Service Tool v.3000

How to use Canon Service Tool v.3000

Before running this tool, make sure the printer in the Service Mode position.
  • Download Service Tool v.3000 (free, no virus, support OS Windows, Linux, Macintosh)
  • Extract file and open Service Tool. If Service Tool can't be open, unplug the USB cable and then open the Service Tool. After the open Service Tool, re-connect USB cable.
  • Load paper A4 or Letter
  • For your reference in servicing, click EEPROM information print before resetting (1)
  • Clear Ink Counter, select ALL (2) and then click SET (3). After the ink absorber counter is reset, the counter value is printed automatically. Clear Ink Counter - select ALL means: Resets all the four ink absorber counters (Main_Black, Main_Color, Platen_Away, Platen_Home).
  • Select the destination, Region: ASA, AUS, BRA, CHN, CND, EMB, EUR, JPN, KOR, LTN, TWN, USA (4) and then click SET (5)
  • Click EEPROM information print once again after resetting (1).
  • Compare EEPROM information before and after reset.
  • If all goes well, close Service Tool
  • Turn off the printer (wait 10 seconds)
  • Turn on printer and printer ready to use

Download Canon Service Tool v.3000

No comments:

Post a Comment