Wednesday, September 4, 2019

Textual description of firstImageUrl

Service Tool v.1020


Supported OS
Free, no virus, support OS Linux, Macintosh, Windows (98, ME, 2000, XP, 7, 8, 8.1, 10.)

If Service Tool can not be open (not support OS), follow instructions:

1. Extract file – open folder Service Tool. Right-click Service Tool.exe – select Properties
2. Compatibility
3. Checkbox: Run this program in compatibility mode for Windows XP (Service Pack 2)
4. OK.



Service Tool v.1020 support OS Win 7, 8, 8.1, 10


Service Tool v.1020


Supported Printer

Pixma iP Series
iP3600 Series: iP3600, iP3610, iP3620, iP3630, iP3640, iP3650, iP3660, iP3670, iP3680
iP4600, iP4650, iP4660, iP4680 

Pixma MP Series
MP190, MP198, MP240, MP245, MP260, MP268, MP480, MP486, MP540, MP545, MP620, MP620B, MP628, MP630, MP638, MP980, MP988


How to Use Canon Service Tool v.1020


How to Use Canon Service Tool v.1020

Before running this tool, make sure the printer in the Service Mode position.
  • Download Service Tool v.1020
  • Extract file and open Service Tool. If Service Tool can't be open, unplug the USB cable and then open the Service Tool. After the open Service Tool, re-connect USB cable.
  • Load paper A4 or Letter
  • Select USB Port (1)
  • For your reference in servicing, click EEPROM information print before resetting (2)
  • Clear Ink Counter, click MAIN (3). Wait for the printer to finish printing D=000.0. D is a Waste ink amount. D=000.0 means "The ink absorber counter has been reset to zero".
The ink absorber counter has been reset to zero

  • Select the destination, Region: ASA, AUS, BRA, CHN, CND, EUR, JPN, KOR, LTN, TWN, USA (4) and then click SET (5)
  • Click EEPROM information print once again after resetting (1).
  • Compare EEPROM information before and after reset, look at the value of D (Waste ink amount).
  • If all goes well, close Service Tool
  • Turn off the printer (wait 10 seconds)
  • Turn on printer and printer ready to use

Download Canon Service Tool v.1020

No comments:

Post a Comment