Thursday, July 25, 2019

Textual description of firstImageUrl

Service Tool v.1074

Supported OS
Linux, Macintosh, Windows (98, ME, 2000, XP, 7, 8, 8.1, 10.)

Troubleshooting
  • If Service Tool can't be open, unplug the USB cable, and then open the Service Tool. After the open Service Tool, re-connect USB cable.
  • Service Tool not active after connecting the printer. Printer not in Service Mode condition. Turn off printer, repeat Service mode operation procedures.
  • Service Tool does not support Operating System. 

If the Tool can not be open, follow the instructions:
1. Extract file – open folder Service Tool v.1074. Right-click Service Tool v.1074.exe – select Properties
2. Compatibility
3. Checkbox: Run this program in compatibility mode for:
4. Select Windows XP (Service Pack 2)
5. OK.

Service Tool v.1074 support OS Win 7, 8, 8.1, 10

Service Tool v.1074

Supported Printer

Pixma iP Series
iP1900, iP1980, iP2700, iP2702, iP2770, iP2772, iP2780

Pixma MP Series
MP190, MP198, MP230, MP237, MP250, MP252, MP258, MP280, MP282, MP287

Pixma MX Series
MX340, MX347, MX348, MX350, MX357, MX358

Pixma MG Series
MG2120. MG2140, MG2150, MG2170, MG2240, MG2250, MG2270, MG5210, MG5220, MG5230, MG5240, MG5250, MG5270, MG5280


How to Use Canon Service Tool v.1074

Reset the printer with Canon Service Tool v.1074


Before running this tool, make sure the printer in the Service Mode position.
  • Download Service Tool v.1074
  • Extract file and open Service Tool. If Service Tool can't be open, unplug the USB cable and then open the Service Tool. After the open Service Tool, re-connect USB cable.Load paper
  • Extract file and open Service Tool.
  • Load paper A4 or Letter
  • For your reference in servicing, click EEPROM information print before resetting (1)
  • Clear Ink Counter, click MAIN (2). Wait for the printer to finish printing D=000.0. D is a Waste ink amount. D=000.0 means "The ink absorber counter has been reset to zero".

The ink absorber counter has been reset to zero

  • Select the destination, Region: ASA, AUS, BRA, CHN, CND, EUR, JPN, KOR, LTN, TWN, USA (3) and then click SET (4)
  • Click EEPROM information print once again after resetting (1).
  • Compare EEPROM information before and after reset, look at the value of D (Waste ink amount). If all goes well, close Service Tool
  • Turn off printer (wait 10 seconds) then turn-on printer and Printer ready to use

Download

No comments:

Post a Comment